7
www.fastTT.bike
FastTT Aero Bar Installation Guide - TKP v8
The finger hooks can be placed at any height depending on personal setup preference. The
lower you set up the finger hooks, the more bar angle you can have (up to 15 degrees UCI
maximum).
Trimming the bar ends to the correct length is essential for accurately measuring the UCI
dimensions and MUST BE COMPLETED BEFORE MOVING TO THE NEXT STEP.
Remove the foam elbow pads. Place the bars onto your existing mounting pad/base in the
position that matches your original bar setup (refer to the original measurements you took in
SECTION A - GETTING STARTED).
SECTION A - GETTING STARTED