Fastech Ezi-servo plus-R, User Manual

Page: 65 / 100

6.6. Input Signal
65
www.fastech.co.kr
6.6.12 JPT Input0~Input2 (Jump Position Table Input) input
Select motion pattern(position table number) to be subsequently executed according to input signal
conditions.
【
Example
】
If PT 14 motion operates, when there is no other input signal, next motion becomes
PT 15 as shown in first diagram
. However, if ‘JPT Input0~Input2’ input signal is set to ON while PT
14 is executing, each corresponding position number is executed as shown in second, third and
fourth diagram.
Data of PT 14
PT number … JP Table No. JPT 0 JPT 1 JPT 2
14 … 15 115 116 225
* Ezi-SERVO ALL-28 is not support this function
.