Fastcorp, LLC
DIVI Setup and Users Guide
Page
42
of
62
Rev 6
The boot loader version will be displayed in the “BOOTVxxx.bi2” format, where “xxx” is the numeric revision
number. For example, BOOTV238.bi2.
Press the pound “#” key. The Display will read:
PROGRAMMING
BootVxxx.bi2
A LED status light on the right side of the board will start flashing rapidly. When the
process is complete, the display will read:
Update success.
Remove card…..
Press down gently on the top and let go. The card will slide up slightly in the sleeve. Leave
the Micro SD card in the slot. The Display will read:
o
BOOT UPDATE xxx
o
Done!
o
The Display will change to read:
BOOT LOAD xxx
Out of Service
PROGRAM REVISION UPGRADE: (Firmware after Revision V119K)
The MICRO SD Card should still be in the Daughter Board slot. Press down on the Micro
SD card so that it locks into the slot. If The display will show
Micro SD ready
:
1.
Load Config.
2.
Save Config.
3.
Load Firmware
4.
Save DEX Sales
Enter “3” to load new firmware.
There may be more than one program version contained on the card. Use the “*” key to
scroll to the latest or highest number version.
The program
version will be displayed in the “FC0xxxy.bi2” format, where “xxx” is the
numeric revision number and “y” is the alphabetic revision suffix. For example,
FC0120F.bi2.
