4000 Series
Page
12
of
41
3460006-17_serial series 5000000
10.
North America Electrical Plug:
The unit comes installed with a Hubbell Locking Plug,
Hubbell part number: CS8365C. Plug the unit into the matching receptacle Hubbell part
number: CS8369 (not provided). The plug is 50A rated, 250VAC, 3P4W. Note: The rate
chamber is powered by three phase and the refrigeration compressors are required to
operate in a specific direction. The unit incorporates a phase monitor to protect the
compressors. If the unit does not turn on (no indicator lights) when the power switch is turned
on the first thing to do is switch 2 of the phase legs in the receptacle or power panel.
European Plug:
Connect the unit to an IEC 60309 (6H) 30 Amp 200/415V receptacle, such
as an ABL Sursum F52S33A.
Note
: The rate chamber is powered by three phase and the refrigeration compressors are
required to operate in a specific direction. The unit incorporates a phase monitor to protect
the compressors. If the unit does not turn on (no indicator lights) when the power switch is
turned on the first thing to do is switch 2 of the phase legs in the receptacle or power panel.
11.
4102/4105 – Water cooled condenser only. Inlet and Outlet chilled or tower water connections
are located at the rear of the 4102/4105, each connection are 1/2” FPT (Female Pipe Tread). For
the 4105, a 22mm, 1.5 adapter is provided (refer to the Chamber Layout drawing at the end of
the manual for connection locations).
a) We recommend the use of industrial ½” flexible hose grade with a minimum 8 feet (2.5
meter) in length. The use of flexible hose for the water inlet and outlet allows easy
movement of equipment during service and troubleshooting.
Hard piping of equipment is not recommended.
