Farr KT5500, Technical Manual

Page: 14 / 165

KT5500 5-
1
/
2
” T
ong
& CLInCHER® B
aCKup
S
ECTIon
C
onTEnTS
1.4
T
ECHnICaL
M
anuaL
S
pECIfICaTIonS
Use an EP synthetic grease that meets or exceeds the following specifications:
Thickener Lithium Complex
NLGI consistency grade 2
NLGI performance grade GC-LB
Penetration - ASTM D 217 (25°C [77°F] 265-295 minimum 0.1 mm) worked 60 strokes
Dropping point, °F[°C] - ASTM D2265 550 [288] minimum
High temperature life, hours - ASTM D 3527 160 minimum
Oxidation stability, psi - ASTM D 942 (100 hr/300 hr) 0/3
Water washout, percent - ASTM D 1264 1.8 max
Rust and corrosion - ASTM D 1743 pass
Oil separation, percent loss - ASTM D 1742 1.1 max (24 hours, 25°C [77°F]
Leakage, g lost - ASTM D 4290 1.0 max
Four ball wear test, mm scar - ASTM D 2266 0.40 max
Fretting wear, mg - ASTM D 4170 3.4 max
Four ball EP, kgf - ASTM D 2596:
Weld point: 400 minimum
Load wear index: 50 minimum
Timken OK load test, lbs - ASTM D 2509 50
Low temperature torque, N*m - ASTM D 4693 1.3 max (-40°C [-40°F])
LT-37 pumpability, g/min 360/7 (60°F/0°F [16°C/-18°C])
Copper corrosion - ASTM D 4048 1B
Oil viscosity: 40°C [104°F], cSt 151
100°C [212°F], cSt 19.2
Flash point, °F[°C] - ASTM 92 450[232]
Use a premium quality hydraulic fluid that meets or exceeds the following specifications:
Typical Density (kg/m3) 878
Viscosity - cSt @ 40 °C 68.8
- cSt @ 100 °C 8.7
Viscosity Index 97
Pour Point °F [°C] -22 [-30]
Flash Point °F [°C] 432 [222]
Colour, ASTM 1.5
Neutralization Number 0.40
Rust Protection - Distilled Water No Rust
- Sea Water No Rust
Hydrolytic Stability - Cu Mass Loss, mg/cm2 0.04
Copper Corrosion Test 1A
Filterability: Denison - Wet & Dry Pass
Afnor - Wet & Dry Pass
Cincinatti Milacron Spec Approved P69
Denison HF-0: Approved
Denison P-46 Piston Pump: Pass
Denison T6C Vane Pump: Pass
Vickers 35VQ25 Vane Pump Test: Pass
Vane pump test total ring and vane wear, mg. <10
Oxidation Stability:
Turbine Oil Stability Test Life, hours 2500+
Rotary Bomb Oxidation Test, minutes 325
FZG Spur Gear Test, Failure Load Stage (FLS) 12