Farr KT5500, Technical Manual

Page: 122 / 165

KT5500 5-
1
/
2
” T
ong
& CLInCHER® B
aCKup
S
ECTIon
C
onTEnTS
6.2
T
ECHnICaL
M
anuaL
Item Type Description Qty Part #
Assembly 30” Arm-20K Tension Load Cell and Gauge 1 10-0028T
A
Part 4.08 in2 Tension Load Cell 1 10-0008T
B Part Torque Gauge, 20,000 Ft.-Lbs. 36” Arm 1 10-0028G
C
Part Hydraulic Hose 1 02-0069
Item Type Description Qty Part #
Assembly 32” Arm-20K Compression Load Cell and Gauge 1 10-0029C
A
Part 8 in 2 Compression Load Cell c/w hoses & fittings 1 10-0008C
B Part Torque Gauge, 20,000 Ft.-Lbs., 32” Arm 1 10-0029G
C
Part Hydraulic Hose 1 02-0069
THE TORQUE GAUGE USED IS FULLY DEPENDANT UPON THE ARM LENGTH AND TORQUE
RANGE OF THE EQUIPMENT IN USE. THE PART NUMBERS LISTED IN THE FOLLOWING TABLES
ARE CORRECT FOR ACCURATELY MEASURING TORQUE USING THE EQUIPMENT FOR WHICH
THIS MANUAL IS SUPPLIED.
BASIC TORQUE MEASUREMENT (Continued:)
The images on the preceding page are for illustration purposes only and may not accurately represent the torque gauge and load cell
that have been supplied with your equipment. Please note that the parts listed in the following table are correct for accurate torque
measurement while using the equipment for which this manual is supplied.
T
oRquE
M
EaSuREMEnT