Farr KT5500, Technical Manual

Page: 7 / 165

KT5500 5-
1
/
2
” T
ong
& CLInCHER® B
aCKup
S
ECTIon
C
onTEnTS
vii
T
ECHnICaL
M
anuaL
Summary Of Revisions
Date Section Page Description Of Revision
Sep 2007 N/A N/A Initial Release
APR 2008
Intro
iii
Corrected table of assemblies covered by this manual, added compression LC style
backup
1 1.3 Added arm length specs for compression LC style backup
3 3.4 Added imagery for parts identification for compression LC style backup
7 7.38 Created parts lists for compression-style LC backup
8 8.1 Added compression load cell information
8 8.4 Added detailed compression load cell parts list
APR 2009 7 7.21 Corrected reference to page number showing the jaw availability.
AUG 2009 Intro
iii
Added model 80-0420-16 (tong with low-profile
CLINCHER®
backup)
Sep 2010 N/A N/A
Updated graphical layout to current branding standards, added 85-0404-1 to covered
assemblies, added drawings for 85-0408 backup and mounting kit
Nov 2011
2 2.8 Removed hydraulic schematic for assembly not equipped with safety door.
2 2.8 Corrected hydraulic schematic B.O.M.
2 2.16 Revised Section 2.F.1, Tong Rig-Up & Leveling (Suspension & Restraint)
2 2.18 Added Section 2.F.3, Tong Rig-Up & Leveling (Load Cell Configuration)
2 2.19 Inserted Section 2.G.1, Operator Training
3 3.1 Revised Section 3.A, General Maintenance Safety Practices
3 3.1 Revised Section 3.B, Cleaning
3 3.1 Inserted Section 3.C, Preventive Maintenance Practices
3 3.6 Added lubrication instruction, CLINCHER® cylinders
3 3.7 Added lubrication instruction, compression load cell
3 3.11 - 3.20 Revised Section H, Mechanical Assembly Procedures
3 3.21 - 3.32 Moved all maintenance procedures from appendices to maintenance section.
4 4.1 - 4.6 Revised troubleshooting section
5
5.4 - 5.5
New support roller assembly and B.O.M. Removed door pivot roller pages and incorpo-
rated with support roller assembly.
5
5.7 Corrected rotary idler B.O.M.
5
5.16 - 5.17 New cage plate assembly and B.O.M.
5
5.24 - 5.25 Replaced motor & motor mount assembly & B.O.M.
5
5.28 - 5.29 Replaced tong door assembly & B.O.M.
6 Complete revision of torque measurement section
Copyright © 2007 - 2011 McCoy Corporation, including its wholly owned subsidiaries, (“McCoy”), all rights reserved. This document is the
property of McCoy and is supplied as reference information for users of our products. This document and the contents within are consid-
ered confidential information, not to be disclosed, copied, transmitted, transcribed in any form, or stored on any type of data storage media
without the express written consent of McCoy.
McCoy has made every effort to ensure the information contained in this document is accurate and current. This manual is intended to
provide equipment operation and safety instructions for your equipment. However, McCoy does not warrant or guarantee that the informa-
tion is either complete or accurate in every respect and the user of the manual should consult with its McCoy sales representative for any
clarifications and updates.
The user of the manual shall protect, indemnify, and hold harmless McCoy and its directors, officers, employees, and agents from and
against all liability for personal injury, death, or property damage resulting directly or indirectly from the use of the information contained
in this manual.
Observance of all descriptions, information and instructions set out in this manual is the full responsibility of the user. This manual is
intended for guidance and informational purposes and must be used in association with adequate training and on-the-job supervision to
provide safe and effective equipment use.
It is the responsibility of the user to conform to all regulations and requirements issued by an authority or agency which may affect the
operation, safety or equipment integrity, that may overrule the content of this documentation.
The user will acknowledge and obey any general legal or other mandatory regulation in force relating to accident prevention, safety, and
equipment integrity.