Farmi Forest CR69 Operation, Maintenance And Spare Parts Manual Download Page 43

Page: 43 / 48

Farmi Forest Corporation

Ahmolantie 6

FIN-74510 IISALMI

FINLAND

Farmi Forest Oy grants a 12-month warranty on all of its products, covering material and manufacturing faults. The

warranty comes into effect on the product’s delivery date.

The manufacturer is not liable for damages caused by:

• misuse of the product

•

alterations or repairs made without the manufacturer’s permission

•

insufficient maintenance

• non-original parts

The warranty does not cover wearing parts.

Send faulty parts, carriage paid, to the manufacturer for inspection. Repairs will be conducted by Farmi Forest Oy or an

authorized expert. The warranty is valid only if the bottom part of this page is filled in and returned to the manufac

turer within 30 days of receipt of the product.

By returning the warranty certificate, you confirm that you have read and understood the instruction manual that came

with the product.

WARRANTY

Summary of Contents for CR69

















































Search results

Summary of Contents for CR69

Reviews:

Related manuals for CR69

Brands by name

Popular brands

Farmi Forest CR69, Operation, Maintenance And Spare Parts Manual

Search results

Summary of Contents for CR69

Reviews:

Related manuals for CR69

Brands by name

Popular brands