Farmi Forest CR69, Operation, Maintenance And Spare Parts Manual

Page: 26 / 48

26 CR69
MAINTENANCE ITEM PROCEDURE
Maintenance interval
every day
once a week once a year
General
Check cylinders and hoses for
leaks.
Inspect pins and lockings.
Check the tightness of
mounting screws and
chains.
Visual inspection of
loadbearing structure
condition.
Slewing device
Lubricate bushings
Check oil level.
Tighten mounting screws.
Check the gear racks, adjust
if needed.
Boom joints and sli-
ding surfaces
Lubrication Check the condition of the
bushings and sliding parts
Boom assembly
cylinders
Lubrication
Lubricate joint bearings.
Check the condition of the
cylinders.
Check the condition of the
cylinder bearings.
Grapple
Mounting the grapple to the
rotator.
Grapple linkage
Lubrication
(6 grease nipples)
Both ends of the
grapple cylinder
Lubrication
(2 grease nipples)
Support legs and
support leg frame
Check the condition of the
cylinder bearings.
Support leg joints
Lubrication
(2 grease nipples)
Both ends of the
support leg cylinders
Lubrication
(4 grease nipples)
GEAR RACKS ADJUSTMENT
1. Control gear racks after every 200 working hours.
2. Turn column into center position.
3. Release the locking nut widely enough, so it will not obstruct tightening (pos. 3 fig. A).
4. Tighten the bolt (pos. 3, fig. A) against the gear rack with 10 Nm (1 kg*m).
5. Tighten the locking nut (pos. 3 fig. A).
6. Repeat same procedure with both bolts.
7. Make sure you adjust bolts after every 200 working hours.
8. With professional everyday usage, tighten bolt at least once a month.