Farm King BW200, Operator And Parts Manual

Page: 35 / 82

Operation - 200 Bale Wrapper
33
IMPORTANT
Use the bales within twelve months from their
wrapping date.
Keep the film rolls in good condition, especially
the edges, to minimize the risk of the film breaking
while wrapping.
Do not wrap during precipitation.
Wrap bales in above-freezing temperatures.
Wrap bales on a field or in their storage area.
Avoid unnecessary transport of wrapped bales to
minimize the chance of damaging the film.
WARNING
AVOID INJURY OR DEATH
If any hazards involving the bale wrapper are
present:
• Lower the control lever on the hydraulic control
unit
• Switch off the tractor engine, remove the
ignition key and engage the parking brake
• Locate the hazard and remove
Be sure to lock the rotary table during loading
and unloading of the bale.
Bale Unloading
Figure 17
To unload the bale (Item 1), stop the rotary table
about 25° beyond the axis parallel to the wrapping
machine axis and move the table back by using
the control switch lever to a position parallel to
the machine axis until the rotary table is locked
[Figure 17] .
The conical rolls (Item 2) located on the sides of
the rotary frame prevent the film from falling off
the drums while wrapping
[Figure 17] .
The film cutting system should be located in front
of the wrapping machine. The unloading of the
bale is completed by lifting the rotary table with
the bale as shown
[Figure 17]
.
During the unloading process, the cutter cuts away
the film. After unloading the bale, all working
components should return to their initial position.
Another bale may now be loaded.
1
2