Farm King BW200, Operator And Parts Manual

Page: 39 / 82

Operation - 200 Bale Wrapper
37
Figure 21
Ensure the loading arm (Item 1) is locked upright
in the transport position. Secure the loading arm
using the locking pin (Item 2), M8x50 bolt, and M8
nut (Item 3)
[Figure 21]
.
Comply with federal, state, local and provincial
laws regarding the transport of farm equipment
on public roadways.
Verify that the tractor is approved for transporting
the equipment and that the equipment is securely
attached to the tractor.
Verify that the SMV (Slow Moving Vehicle)
emblem, all lights and reflectors are clean and
visible.
WARNING
AVOID SERIOUS INJURY OR DEATH
Use of an unapproved hitch or tractor can result in
loss of control, leading to serious injury or death.
Tractor and hitch must have the rated capacity to
tow equipment.
WARNING
AVOID SERIOUS INJURY OR DEATH
Excess weight will greatly increase tractor
stopping distance and may cause the operator to
lose control of the tractor.
Follow the rules of Highway Code and
the Manufacturer recommendations when
transporting the wrapping machine on public
roads.
If an emergency requires the driver to stop the
tractor with the wrapping machine in tow on a
public road, the tractor driver should:
• Stop the vehicle without causing any danger to
the road users
• Stop the vehicle as close to the road edge as
possible and parallel to the road axis
• Switch off the engine, remove the ignition key,
engage the parking brake and place wedges
under the wrapping machine wheels
• Place the warning triangle behind the vehicle
to 30—50 meters and activate the emergency
lights
• In the event of a breakdown, take the required
precautions to ensure safety in the area
1
2 3
1