Farm King 2400 Operator And Parts Manual Download Page 97

Page: 97 / 112

Specifications - Round Bale Carrier 2400

SPECIFICATIONS

Dimensions

Performance

Load Capacity

DESCRIPTION

2400

Overall Length

34’ (10.4 m)

Usable Deck Length

24’ (7.3 m)

Maximum Overall Width

22’ (6.7 m)

Transport Width

12’ 7” (3.8 m)

Overall Height

12’ 10” (3.9 m)

Deck Height

3’ 7” (1.1 m)

Lift Arm Height (Lift Arm Fully Raised)

12’ 10” (3.9 m)

DESCRIPTION

2400

Weight (empty)

7140 lb. (3242 kg) (approx.)

Hitch Weight (empty)

1650 lb (749 kg) (approx.)

Tires

(4) 12.5L x 15FI, Load Range F

(Intermittent Unloaded Highway Use)

Tire Capacity

4,680 lb (2,130 kg) @ 90 PSI Inflation

Hubs

6 bolt W / Twine Guard

Maximum Hydraulic Pressure

3000 PSI (20685 kPa)

Minimum Hydraulic Pressure

2250 PSI (15514 kPa)

Hydraulic Motors (Pusher)

Dual 22.2 cu. in.

Lift Cylinder

4” diameter x 12" stroke

Tilt Cylinders

3” diameter x 16" stroke

Electrical

Power: 12v, Fuse: 15 amp

DESCRIPTION

2400

Maximum Load (GVW)

23,140 lb (10,496 kg)

48” (122 cm) Bales

10 Bales (double row on carrier)

60” (152.4 cm) Bales

8 Bales (double row on carrier)

Summary of Contents for 2400

















































































































Search results

Summary of Contents for 2400

Reviews:

Farm King 2400, Operator And Parts Manual, Page: 97 / 112

Search results

Summary of Contents for 2400

Reviews: