Farm King 2400, Operator And Parts Manual, Page: 41 / 112

Operation - Round Bale Carrier 2400
41
Connecting Hydraulic Lines
NOTE: Make sure the quick couplers are fully
engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and type.
To Connect:
Figure 32
Connect the two hydraulic lines to the tractor [Figure 32] .
1. Supply Line (Red dust cap) “P” port of valve bank.
2. Return Line (Black dust cap) “T” port of valve bank.
To Disconnect:
Pull on the hydraulic lines to disconnect.
HIGH PRESSURE FLUID HAZARD
To prevent serious injury or death from high
pressure fluid:
• Relieve pressure on system before repairing or
adjusting.
• Wear proper hand and eye protection when
searching for leaks. Use wood or cardboard
instead of hands.
• Keep all components in good repair.
• Contain and dispose of any oil leakage in an
environmentally safe manner.
• Thoroughly clean the quick couplers before
making connections. Dirt can quickly damage
the system.
B-10052
1
2
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick couplers
can get hot when running equipment. Be careful
when connecting and disconnecting quick couplers.