Farm King 2400, Operator And Parts Manual, Page: 46 / 112

Operation - Round Bale Carrier 2400
46
Unloading Procedure
Move the tractor and bale carrier to unloading area.
Stop the tractor and bale carrier on flat level surface.
Figure 39
Using the tractor auxiliary hydraulics, raise the tipping
frame until the frame is slightly off the ground
[Figure
39] .
Press and hold the PUSHER BACK switch, once the rear
bales have been pushed off, slowly drive forward while
pushing the bales back (unloading) to keep all bale ends
in contact. When the last bales have been unloaded and
indicator lowers, release PUSHER BACK switch.
Drive the tractor forward until there is enough room to
safely lower the TIPPING FRAME.
Using the tractor auxiliary hydraulics, fully lower the
tipping frame.
ELECTROCUTION HAZARD
To prevent serious injury or death from
electrocution, stay at least 50 ft. (15 m) away from
overhead power line when raising tipping frame or
lift arm.
AVOID INJURY OR DEATH
Before moving the tractor and bale carrier, look in all
directions and, make sure no bystanders, especially
small children are in the work area. Do not allow
anyone between the tractor and the equipment when
unloading bales.
B-10009
Do not run pusher all the way to the end, the
resulting shock load may cause damage to chain
and drive.
Front indicator comes down (after pushing off the
last bales) signaling the operator to release pusher
back switch.