Farm King 2400, Operator And Parts Manual, Page: 13 / 112

Safety - Round Bale Carrier 2400
13
SAFETY INSTRUCTIONS
Safe Operation Is The Operator’s Responsibility
Safe Operation Needs A Qualified Operator
For an operator to be qualified, he or she must not use
drugs or alcoholic drinks which impair alertness or
coordination while working. An operator who is taking
prescription drugs must get medical advice to determine
if he or she can safely operate a machine and the
equipment.
A Qualified Operator Must Do The Following:
Understand the Written Instructions, Rules and
Regulations
• The written instructions from Farm King include the
Warranty Registration, Dealer Inspection Report,
Operator And Parts Manual and machine signs
(decals).
• Check the rules and regulations at your location. The
rules may include an employer’s work safety
requirements. Regulations may apply to local driving
requirements or use of a Slow Moving Vehicle (SMV)
emblem. Regulations may identify a hazard such as a
utility line.
Have Training with Actual Operation
• Operator training must consist of a demonstration and
verbal instruction. This training is given by the
machine owner prior to operation.
• The new operator must start in an area without
bystanders and use all the controls until he or she can
operate the machine safely under all conditions of the
work area. Always fasten seat belt before operating.
Know the Work Conditions
• Clear working area of all bystanders, especially small
children and all obstacles that might be hooked or
snagged, causing injury or damage.
• Know the location of any overhead or underground
power lines. Call local utilities and have all
underground power lines marked prior to operation.
• Wear tight fitting clothing. Always wear safety glasses
when doing maintenance or service.
This symbol with a warning statement means:
“Warning, be alert! Your safety is involved!”
Carefully read the message that follows.
Safety Alert Symbol
The signal word CAUTION on the machine and in the
manuals indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against
unsafe practices.
The signal word DANGER on the machine and in the
manuals indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
The signal word WARNING on the machine and in
the manuals indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
This notice identifies procedures which must be
followed to avoid damage to the machine.
Operators must have instructions before operating
the machine. Untrained operators can cause injury
or death.