- 14 -
Mi 2567
I
TALIANO
E
NGLISH
F
RANÇAIS
E
SP
AÑOL
P
ORTUGUÊS
D
EUTSCH
3. SETTINGS
The parameters that follow can be modified by the user during
normal use of the video intercom.
3.1 Volume
The user can adjust the volume of the conversation by
acting on keys
and
; it is possible to adjust different
levels for conversation with the external station and for the
intercommunication; the adjustment takes place during the
conversation and the set levels will remain valid also for le
next conversations.
3.1.1 Audio level with external door station
During a conversation with the external station press for a
long time key
; icon lights up and there are about
3 seconds to increase
or decrease
, the audio
volume; the set level will be stored and used also for future
conversations with the external station.
3.1.2 Intercommunicating audio level
During an intercommunicating conversation press for a
long time key
; icon lights up and there are about
3 seconds to increase
or decrease
, the audio
volume; the set level will be stored and used also for future
intercommunicating conversations.
3.2 Ringtones
The user can modify the melody and the number of rings
for each type of call in arrival; instead, the volume is the
same for all calls.
The types of calls are:
- from external station
- from intercommunicating block of flats
- from floor
- from intercommunicating apartment
3.2.1 Entering in the ringtone programming mode
With the video intercom in stand-by, press key
for a long
time, the ringtone programming mode is entered and icon
lights up; if within 10 seconds no operation will occur,
the device exits automatically from the programming mode
and icon
turns off.
Attention:
to save the chosen melody and the desired
number of rings, it is necessary to associate the ringtone
to the type of call as described in paragraph 3.2.5.
3.2.2 Select
melody
The available melodies are:
- Din-don
- Classic
- High trill
- Low trill
To select the melody press repeatedly key ; the melodies
will be selected in sequence and reproduced by the
device; after having selected the melody, pass to the next
programming.
3.2.3 Adjust the ringtone volume
With keys
or
the volume can be lowered or raised.
Attention:
the volume of the ringtone is the same for
all types of calls.
3.2.4 Setting the number of rings
Upon arrival of the call each melody can be repeated from
1 to 8 times (number of rings); to change the number of
rings press repeatedly key ; at each pressure the number
of rings increases by one unit; a tonality, repeated n times,
will indicate the number of rings that have been selected.
3.2.5 To associate the ringtone to the type of call
To end programming, it is necessary to attribute the
previously selected ringtone to the type of call that can be:
- from external station
- from intercommunicating block of flats
- from floor
2.2 Function of the keys during a conversation
Upon arrival of a call or during a conversation, the keys have
the following functions:
Keys
Short pressure
The function depends on the Address stored in
the pushbutton (for programming see paragraph
4.1.2 Addresses associated to the key
), in detail:
-
address of another apartment
, no function;
-
address of another room of the same apart-
ment,
no function;
-
address of an actuator,
the actuator is acti-
vated/deactivated;
-
addresses of external stations (max. 4),
no
function.
Long pressure
It activates/deactivates the “silent” function, exclu-
sion of the ringtone and the tones of the device.
When the “silent” function is active, icon blinks
slowly.
Short pressure
Same functions of key
, except for the storing
of the addresses of the external stations which on
key
is not possible (it activates actuator 211
by default).
Long pressure
During the conversation it allows adjusting the au-
dio volume; icon lights up and there are about
3 seconds to increase
or decrease
the
audio volume.
Short pressure
It activates the electrical lock of the external sta-
tion that has made a call.
Long pressure
If programmed on the external station, it activates
the auxiliary actuator of the external station that
has made a call.
Short pressure
It activates the audio conversation with the call-
ing door station or intercommunicating device; if
pressed once again, it terminates the conversation
in progress.
Long pressure
If it is present and programmed, it switches over
on the additional camera of the door station.
