17
GB
KJ 73-A
75036141 - KJ 73-A – rev 01 - ( 02-2021 )
P
P
D
WORKING PROBLEMS
(fig.
f7
)
Any time it is necessary to unscrew forcedly the threaded tie rod from the insert, push the button (
P
).
ATTENTION!
Carry out this operation keeping the riveting tool firmly in order to avoid sharp movements
which could damage people or things
.
f7
CHANGE OF SIZE
(fig.
f9-f10-f11
)
To change the size make as follows:
•
Disconnect the compressed air feeding from the tool.
•
Unscrew the cone-carrying head (
O
) by a
22 mm
standard spanner (
f9
).
• Extract the threaded tie-rod, pushing and lifting it at the same time (
f10
).
•
After preparing the threaded tie-rod (
A
) of the size you need, arrange and keep the components as shown in
f11
and
assemble. Be sure that the components are correctly placed, rotating the tie-rod by hand (
f11
).
ATTENTION!
Disconnect the machine before carrying out the above-mentioned operations.
