FAR KJ 73-A Translation Of Original Instructions Download

Page: 13 / 32

KJ 73-A

75036141 - KJ 73-A – rev 01 - ( 02-2021 )

INSTRUCTIONS FOR USE I

INDEX

GUARANTEE .......................................................................13
SAFETY MEASURES AND REQUIREMENTS .......................13
TOOL IDENTIFICATION .......................................................14
GENERAL NOTES AND USE ................................................14
MAIN COMPONENTS ..........................................................14
TECHNICAL DATA ...............................................................14
AIR FEED .............................................................................15
PRELIMINARY OPERATIONS ..............................................15
PLACING OF THE INSERT ...................................................16
WORKING PROBLEMS .......................................................17
CHANGE OF SIZE ............................................................... 17
ADJUSTMENT OF TIE-ROD/HEAD UNIT ............................. 19
TOOPING UP THE OIL-DYNAMIC CIRCUIT .........................20
MAINTENANCE .................................................................. 21
DISPOSAL OF THE RIVETING TOOL ...................................21

CAUTION!!!

All the operations must be done in conformity
with the safety requirements, in order to avoid
any consequence for your and other people
security and to allow the best tool work way.

• Read the instructions carefully before using the tool.
• For all maintenance and/or repairs please contact

FAR s.r.l. authorized service centers and use only
original spare parts. FAR s.r.l. may not be held liable
for damages from defective parts caused by failure
to observe what mentioned above (EEC directive
85/374).

THE LIST OF THE SERVICE CENTRES IS AVAILABLE ON
OUR WEBSITE

http://www.far.bo.it ( Organization )

• The tool must be used only by expert workers.

GUARANTEE
FAR

riveting tools are covered by a

12-month

warranty. The

tool warranty period starts on the date of delivery to the
buyer, as specified in the relevant document. The warranty
covers the user/buyer provided that the tool is purchased
through an authorized dealer and only if it is used for the
purposes for which it was conceived. The warranty shall
not be valid if the tool is not used or maintained as specified
in the instruction and maintenance handbook. In the event
of defects or failures,

FAR S.r.l.

shall undertake solely to

repair and/or replace the components it judges to be faulty.

• A protective visor and gloves must be put on when using the

tool.

• Use equipment recommended in the maintenance chapter to

do any maintenance and/or regulation of the tool.

• For topping up the oil, we suggest using only fluids in

accordance with the features specified in this working book.

• If any drop of oil touches your skin, you must wash with

water and alkaline soap.

• The tool can be carried and we suggest putting it into its box

after using.

•  The tool needs a thorough six-monthly overhaul.
•  There are no special requirements for storage.
•  Repairing and cleaning operations must be done when the

tool is not fed.

• A safety balancer is suggested when it is possible.
• If the A-weighted emission sound pressure level is more than

70 dB (A), you must use some hearing protections (anti-noise
headset, etc.).

• The workbench and the work surface must be always clean

and tidy. The untidy can cause damages to people.

• Do not allow unauthorized persons to use the working tools.
• Make you sure that the compressed air feeding hoses have

the correct size to be used.

• Do not carry the connected tool by pulling the hose. The hole

must be far from any heating sources or from cutting parts.

• Keep the tools in good conditions; do not remove either safety

parts or silencers.

• After repairing and/or adjusting, make sure you have already