Fanvil X5 User Manual Download | Manualshive

Page: 75 / 82

background image

<

文档标题

>

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] [email protected]

Beijing Tel:+86-10-5753-6809

Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997

10.3

Reboot Device

Users may reboot the device from soft-menu, [Menu] -> [Reboot System], and confirm the action by

[Yes]. Or, simply remove the power supply and restore it again.

10.4

Reset Device to Factory Default

Reset Device to Factory Default will erase all user’s configuration, preference, database and profiles

on the device and restore the device back to the state as factory default.

To perform a factory default reset, user should

[

Menu] -> [Settings] -> [Advanced settings], and then

input the password to enter the interface. Then choose [Reset to Default] and press [Enter], and

confirm the action by [Yes]. The device wlll be rebooted into a clean factory default state.

10.5

Network Packets Capture

Sometimes it is helpful to dump the network packets of the device for issue identification. To get the

packets dump of the device, user needs to log in the device web portal, open page [System] ->

[Tools] and click [Start] in “Network Packets Capture” section. A pop-up message will be prompt to

ask user to save the capture file. User then should perform relevant operations such as

activate/deactivate line or making phone calls and click [Stop] button in the web page when

operation finished. The network packets of the device during the period have been dumped to the

saved file. User may examine the packets with a packet analyzer or send it to Fanvil support.

10.6

Entering Post Mode and Recover System Image

WARNING!

P

LEASE AVOID UPDATING SYSTEM IMAGE FROM

P

OST MODE UNLESS THE SYSTEM IMAGE

IS DAMAGED

.

If the device could not boot up and entered into POST MODE, it is usually because of system image

damaged due to power failure during software upgrade. When this occurs, users may follow below

steps to restore the system image.

«
...
73
74
75
76
77
...
»

Summary of Contents for X5



















































































Reviews:

No comments

Related manuals for X5

Dialog 4422 IP Office

Brand: Aastra Pages: 151

Brand: Aastra Pages: 2

Dialog 4420 IP Basic

Brand: Aastra Pages: 74

Brand: Aastra Pages: 101

Clearspan 6739i

Brand: Aastra Pages: 9

Clearspan 6739i

Brand: Aastra Pages: 8

Clearspan 6739i

Brand: Aastra Pages: 20

Brand: Aastra Pages: 104

Brand: Aastra Pages: 108

Clearspan 6731i

Brand: Aastra Pages: 2

Brand: Aastra Pages: 7

Brand: Aastra Pages: 1140

Brand: Aastra Pages: 174

Brand: Aastra Pages: 888

Dialog 5446 IP Premium

Brand: Aastra Pages: 87

Brand: Unitech Pages: 2

Brand: Allview Pages: 7

Brand: Paragon Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands