<
文档标题
>
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: [email protected] [email protected]
Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
8.13
LINES / Dial Peer
This functionality offers you more flexible dial rule, you can refer to the following content to know
how to use this dial rule.
Parameters
Description
Phone number
There are two types of matching: Full Matching
or Prefix Matching. In Full matching, the entire
phone number is entered and then mapped per
the Dial Peer rules.
In prefix matching, only part of the number is
entered followed by T. The mapping with then
take place whenever these digits are dialed.
Prefix mode supports a maximum of 30 digits.
Note: Two different special characters are used.
x -- Matches any single digit that is dialed.
[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated
by commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Port
Set the Signal port, and the default is 5060 for
SIP.
Alias
Set the Alias. This is the text to be added,
replaced or deleted. It is an optional item.
Note: There are four types of aliases.
all: xxx
–
xxx will replace the phone number.
add: xxx
–
xxx will be dialed before any phone number.
del
–
The characters will be deleted from the phone number.
rep: xxx
–
xxx will be substituted for the specified characters.
Suffix
Characters to be added at the end of the phone
number. It is an optional item.
Delete Length
Set the number of characters to be deleted. For
example, if this is set to 3, the phone will delete
the first 3 digits of the phone number. It is an
optional item.
