Fanvil LINKVIL W712, User Manual

Page: 45 / 59

: 8VHU 0DQXDO
G.723.1 Bit Rate 5.3kb/s or 6.3kb/s is available.
DTMF Payload Type Enter the DTMF payload type, the value must be 96~127.
AMR Payload Type Set AMR load type, range 96~127.
Opus playload type Set Opus load type, range 96~127.
ILBC Payload Type Set the ILBC Payload Type, the value must be 96~127.
RTP Control Protocol(RTCP) Settings
CNAME user Set CNAME user
CNAME host Set CNAME host
RTP Settings
RTP keep alive Hold the call and send the packet after 30s
9.19 device settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group. User
can configure a multicast DSS Key on the device, which allows user to send a Real Time Transport Protocol
(RTP) stream to the pre-configured multicast address without involving SIP signaling. You can also configure
the device to receive an RTP stream from pre-configured multicast listening address without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
Table 13 - Multicast parameters
Parameters Description
Name Listened multicast server name
Host: port Listened multicast server’s multicast IP address and port.
9.20 device settings >> Action
Action URL
Action urls are used for IPPBX systems to submit device events.
9.21 device settings >> Time/Date
The user can configure the time Settings of the device on this page.
Table 14 - Time&Date settings
Parameters Description
Network Time Server Settings
Time Synchronized via SNTP Enable time-sync through SNTP protocol
Time Synchronized via DHCP Enable time-sync through DHCP protocol