Fanvil LINKVIL W712, User Manual

Page: 30 / 59

: 8VHU 0DQXDO
message after Update Interval.
Upgrade Server Address1 Set available upgrade server address.
Upgrade Server Address2 Set back up available upgrade server address.
Update Interval
Set Update Interval. Enable Auto Upgrade and configure the Update
Interval. If the server has a new firmware, the device will prompt for
upgrade at the interval.
Firmware Information
Current Software Version It will show Current Software Version.
Server Firmware Version It will show Server Firmware Version.
[Upgrade] button
If there is a new version txt and new software firmware on the server,
the page will display version information and upgrade button will
become available; Click [Upgrade] button to upgrade the new
firmware.
New version description
information
When there is a corresponding TXT file and version on the server
side, the TXT and version information will be displayed under the
new version description information.
 The file requested from the server is a TXT file called vendor_model_hw1_0.txt.Hw followed by the
hardware version number, it will be written as hw1_0 if no difference on hardware. All Spaces in the
filename are replaced by underline.
 For example, the txt file name requested by X7C device is linkvil _w712_hwv1_0.txt
 The URL requested by the device is HTTP:// server address/vendor_Model_hw10
.txt
˖
The new version and the requested file should be placed in the download directory of the HTTP
server, as shown in the figure:
 TXT file format must be UTF-8
 vendor_model_hw10.TXT The file format is as follows
˖
Version=2.12.1 #Firmware
Firmware=xxx/xxx.z #URL
ˈ
Relative paths are supported and absolute paths are possible,
distinguished by the presence of protocol headers.
BuildTime=2022.05.06 20:00
Info=TXT
Xxxxx
Xxxxx
Xxxxx
Xxxxx