: 8VHU 0DQXDO
When B or C initiates a call, the SIP number registered by device set A is the calling number.
To set a SIP hotspot, register at least one SIP account.
Picture 18 - Register SIP account
Table 4 - SIP hotspot Parameters
Parameters
Description
Device Table
If your device is set to “SIP hotspot server”, Device Table will display as Client
Device Table which connected to your device.
If your device is set to “SIP hotspot client”, Device Table will display as Server
Device Table which you can connect to.
SIP hotspot
Enable hotspot
Set it to be Enable to enable the feature.
Mode
Choose hotspot, device will be a “SIP hotspot server”; Choose Client, device will be
a “SIP hotspot Client”
Monitor Type
Either the Multicast or Broadcast is ok. If you want to limit the broadcast packets,
you’d better use broadcast. But, if client choose broadcast, the SIP hotspot device
must be broadcast.
Monitor Address
The address of broadcast, hotspot server and hotspot client must be same.
Remote Port
Type the Remote port number.
Configure SIP hotspot server:
Summary of Contents for LINKVIL W712
Page 1: ...8VHU 0DQXDO User Manual W712 Software Version 2 12 0 Release Date 2023 2 3...
Page 17: ...8VHU 0DQXDO Picture 8 Channel configuration Picture 9 Digital channel parameters...
Page 22: ...8VHU 0DQXDO Picture 15 Setting voice prompt...
Page 27: ...8VHU 0DQXDO For example extension 1 dials extension 0...
