english
19
The valves from different
manufacturers may have tolerance
fl
uctuations that make the MAX!
Radiator Thermostat more loosely
seated on the valve. The stability
and seating of the valve can be
improved using the provided
support ring. Place the support
ring (
G
) into the
fl
ange or onto the
valve connection on the radiator
and screw on the thermostat valve.
If the support ring cannot be
fi
tted,
there is adequate stability and it is
not needed for installation.
6.2 SUPPORT RING
have been latched onto the valve
body, fasten the adapters with
the enclosed screw and nut. With
the RAV type of valve, the tappet
extension (
F
) should be placed on
the valve pin before installation.
The RAVL adapter does not have
to be screwed on.
Important notice:
When installing,
please ensure that the spigots
inside the adapter (
D
) are in the
same position as the indentations
(
E
) on the valve. Latch the adapter,
which corresponds to the valve,
completely onto the valve body.