GL-35DSR Appendix
EN
37/37
4.5 Precautions
4.5.1 Power on/off precautions
It is recommended to switch the unit off when not in use. When re-locating the device or when not
in use for an extended period of time, we strongly recommend unplugging the unit.
4.5.2 Location and placing precautions
Avoid positioning your device in the following places:
•
Locations with direct sunlight, next to radiators, other sources of heat.
•
Locations with very high temperatures (more than 38° C) or humidity (more than 90%).
•
Very dusty or sandy locations.
•
Locations subject to vibration, shock, or with a sloping base.
4.5.3 Electricity and power plug
Careful attention must be paid to the following points in order to prevent damage, fire, and/or injury:
•
Make sure the power switch is in the OFF position when you connect the power adapter and
always connect the power adapter to your device first, before you plug it into the wall socket.
•
When removing the power cable from the socket, pull on the plug fixture and never on the cord.
•
Do not connect and remove the power cable with wet hands.
•
Never try to repair the power cable yourself or to modify it in any way.
•
If the unit is dropped or becomes damaged in any other way, unplug the power cable.
4.5.4 Cables
Use only the cables supplied or in order to avoid the risk of malfunction, electric shock, and/or
possible interference to the device.
4.6 Important Notices
4.6.1 About this Manual
This manual was written for the FANTEC GL-35DSR network drive with the firmware version
FT_2.0.0_20100324. Images and descriptions may slightly vary between this document and the
actual product you have, and the available functions will depend on the firmware version.
4.6.2 Intellectual
Property
The FANTEC GL-35DSR network drive is not designed or intended to, and may not be used to
violate any copyrights or other IP (Intellectual Property) rights. Each user of the network drive may
only use it in connection with materials legally owned by or licensed to the user and only extend
such ownership or license rights that will permit such use.
© Copyright 2010 by FANTEC, Inc. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. FANTEC assumes no responsibility for
any errors contained in this manual. FANTEC reserves the right to make changes in the specifications and/or design of
this product without prior notice. The diagrams contained in this manual may also not fully represent the product that you
are using and are there for illustration purposes only. FANTEC assumes no responsibility for any differences between
the product mentioned in this manual and the product you may have.
