GL-35DSR Network Storage & Extra Features
10. Select “RAW”, use the default port number “9100” and then click on OK to confirm it.
11. Click on Finish not complete the TCP/IP Wizard and close the dialog.
12. After clicking on “Next”, a pop-up window will appear asking for a driver. Select your printer
model from the list or browse for the corresponding driver on your local drive.
13. In the next few steps, you will be able to give the printer a name, set it as default printer,
add a description and print a test page. It is not necessary to share the printer with other
network users, because it can be installed on other computers in the same way as here.
14. Once you have completed the wizard set-up your printer should be properly installed and
ready to print.
Note
Not all USB printers are supported, e.g. multi function all-in-one printers and GDI/host-based
printers, therefore, your printer may not be compatible and printing might fail.
EN
29/37
