manualshive.com logo in svg

fann MACS II, User Manual, Page: 54 / 165

Share
Download
fann MACS II User Manual Download Page 54

 

 

MACS II User Manual 

 

101796668 

Revision E 

45 

This screen manages the configuration constants for the dynamic and static 

conditions for temperature control. Note that these are default values and only 

experienced technicians should change these settings. 
Click OK to save any changes and close this screen. Click Cancel to exit this screen 

without saving any changes. 

5.4.2.

 

Profile Editor 

Click Edit > Profile Editor to display the Profile Editor screen to change various 

settings and values for the testing procedure. 

 

Figure 5-8 Profile Editor Screen 

The Profile Editor is the portion of the program that sets up the test sequence. 
The test sequence consists of the following parameters. 

1.

 

HH - Type the hour portion of the step time. 

2.

 

MM – Type the minute portion of the step time. 

3.

 

Temp. – Type the final temperature to be attained at the end of step time. 

The program tries to set up a ramp so that the temperature is reached in 

the time specified. 

Summary of Contents for MACS II






































































































































































Reviews:

No comments