fann MACS II, User Manual, Page: 51 / 165

MACS II User Manual
101796668 Revision E 42
Currently, the events section of this tab is not available. It
is necessary for the user to find SGS and Time events
manually using the cursor.
5.4.1.3. Motion Tab
From Edit Machine Settings, select Motion and the Motion screen displays.
Figure 5-5 Slurry Cup Paddle Motion Tab Screen
In this tab the user can define and name different motions. A test profile is nothing
but a collection of different motions running at different temperatures and pressure
for a specific period of time. In this way a complex set of motor movements can be
accomplished by using the defined motions.
The process of defining a motion consists of the following:
1. Give it a name – Please note that the first four motions cannot be renamed
and are factory defaults.
2. Select a unit for motor speed – If Rev./Min .is chosen, it is possible to set
speeds from 1 RPM to 150 RPM. If Deg./Min. is chosen, you can set speeds
from 0.216 Deg./Min. to 360 Deg./Min.