fann MACS II, User Manual, Page: 23 / 165

MACS II User Manual
101796668 Revision E 14
Description Measurement
Electric Single-phase 230 V, 30 Amps, 50/60 Hz AC power supply
Compressed air 100 PSI (0.79 MPa), filtered, 50 micron
Water 30 PSI (0.31 MPa), filtered, 250 micron/60 mesh
Water drain 212 ° F (100 ° C)
Coolant In & Out
differential
5PSI (0.14 MPa)
The machine comes equipped with Power Cord which has a specific 250V/30A power
plug (Fann P/N 101648380, Hubbell P/N HBL2621) Please ensure you have a suitable
electrical outlet that mates with the supplied Power cord.
3.4. Computer Specifications
The MACS II system includes state-of-the-art software that runs on a Microsoft
Windows-based computer connected via USB. The software can also receive updates
via the Internet. Provided with the MACS II is a DVD-ROM containing the software to
install on the computer.
Following are the minimum computer system requirements for the MACS II system.
Component Specification
Type of computer Laptop or small form factor PC
Operating system Microsoft Windows
®
XP or Windows
®
7
Processor Single or dual core, 1.6 MHz clock speed, Intel or AMD
Memory 2 GB of RAM
Graphics WSXGA (1200x800) resolution or higher
Hard drive 5 GB available
Optical drive DVD
Input devices Keyboard and mouse
Internet access 1.5 Mbits/s data transmission rate (Tier 1 broadband)
Fann does not include a computer with the MACS II system
for running the software provided on the DVD-ROM. The
computer is the sole responsibility of the user and must be
purchased separately.