fann MACS II User Manual Download Page 37

Page: 37 / 165

MACS II User Manual

101796668

Revision E

4.3.4.

Software Updates

The MACS II system is set up to receive automatic software updates remotely over

the Internet. When connected to the Internet, click Help > Check for Updates…

and a dialog box displays.

Figure 4-9 Software Updates Dialog Box

Click Start to check for updates. If the current version is the latest, a message

displays to confirm that status. If a later version is available, it notifies of this event.

Click Update to download the latest version of the software to the computer.

Do not perform this task when running a test. When the

software updates, it closes the program and loses all data.

It is necessary to restart the program to resume testing.

4.4.

Post-Installation Verifications

Before calibrating, configuring, and running tests with the MACS II system, Fann

strongly recommends the following post-installation verifications.
Visually inspect the MACS II system for loose connections and fittings or any other

obvious problems. Using the appropriate tools, tighten anything that is loose. Be

careful not to over-tighten the connections. Verify that none of the hoses leak or that

there are any faulty connections. Refer to

Section 5 MACS II Software

to understand

how the MACS II Software operate
Verify the following subsystems using MACS II software.

Verify that all valves operate by using the Operate Valves screen.

Verify that the motor locks and rotates in CW and CCW directions.

Verify that the unit pressures up to 2000 PSI.

Summary of Contents for MACS II






































































































































































Search results

Summary of Contents for MACS II

Reviews:

fann MACS II, User Manual, Page: 37 / 165

Search results

Summary of Contents for MACS II

Reviews: