manualshive.com logo in svg

Falcon Professional+ FXP 90 Dual Fuel, User Manual

Share
Download
Falcon Professional+ FXP 90 Dual Fuel User Manual Download Page 7

3

ArtNo.270-0001

Proplus control to high

The dual fuel single cavity cooker 

(Fig. 2.1)

 has the following 

features:

A. 

5 hotplate burners including a wok burner

B. 

Control panel incorporating a timer

C. 

Multifunction oven

D. 

Storage drawer

Hotplate Burners

The drawing by each of the control knobs indicates which 

burner that knob controls.
Each burner has a special Flame Supervision Device (FSD) that 

prevents the flow of gas if the flame goes out.

When a hotplate control knob is pressed in, sparks will be 

made at every burner – this is normal. Do not attempt to 

disassemble or clean around any burner while another 

burner is on, otherwise an electric shock could result.

To light a burner, push in and turn the associated control 

knob to the high position as indicated by the large flame 

symbol (

), 

(Fig. 2.2)

.

The igniter should spark and light the gas. Keep holding the 

knob pressed in to let the gas through to the burner for about 

ten seconds.

ArtNo.273-0001 - 90 Pro+ FXP annotated

OFF

A

B

C

D

2. Overview

Fig. 2.1 

Fig. 2.2 

Summary of Contents for Professional+ FXP 90 Dual Fuel

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands