manualshive.com logo in svg

Falcon Professional+ FXP 90 Dual Fuel, User Manual

Share
Download
Falcon Professional+ FXP 90 Dual Fuel User Manual Download Page 25

21

Oven not coming on

Is the power on?
If not there may be something wrong with the power 

supply. Is the cooker supply on at the circuit breaker?
Have you set a cooking function?

Oven temperature getting hotter as the cooker gets older

If turning the knob down has not worked or only 

worked for a short time then you may need a new 

thermostat. This should be fitted by a service person.

An oven light is not working

The bulb has probably burnt out. You can buy a 

replacement bulb (which is not covered under the 
warranty) from a good electrical shop. Ask for a 15 W 

230  V lamp, FOR OVENS. It must be a special bulb, heat 

resistant to 300 °C 

(Fig.6-1)

.

Turn off the power at the circuit breaker.
Make sure the oven is cool. Open the oven door and 

remove the oven shelves.
Unscrew the bulb cover by turning counter-clockwise. It 

may be very stiff 

(Fig.6-2)

.

Taking care to protect your fingers in case the bulb 

should shatter, unscrew the old bulb.
Screw in the new bulb; screw back the bulb cover. Turn 

on the circuit breaker and check that the bulb now 

lights.

The door is misaligned

The cooker has not been levelled correctly. To level the 

cooker, adjust the feet and rear rollers. Use a spirit level 

to check that the cooker is level – at the front and at 

both sides – within the oven cavity.

ArtNo.324-0005  Oven light bulb

Fig.6-1

Fig.6-2

Summary of Contents for Professional+ FXP 90 Dual Fuel

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands