WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
39
5.5. To Replace the Oven Door Hinge
Remove the oven door (see 5.1).
Lift out the inner panel and place it, outer side up, on a
clean level surface. Undo the screws securing the hinge
in place. Remove the hinge.
Replace the hinge and rebuild the door in reverse order.
5.6 To Replace the Oven Door Seal
Open the oven door. The seal is held in place by small
spring clips to the cooker front. At the corner, squeeze
the clip and pull the seal diagonally away from the door
centre until that clip is released
(Fig.9-21)
.
Proceed to the next clip and release it in a similar way,
and so on. Use force if the clips are stiff, as the old seal
will be discarded.
When fitting the new seal, position the seal join at the
bottom. Clip the new seal in one of the corner holes of
the door, and proceed round the door snapping in each
spring clip in turn.
ArtNo.320-0005 Oven door rubber seal
Gasket
Centre glass
panel assembly
Inner centre
glass panel
Fig.9-20
Fig.9-21
Summary of Contents for Professional+ FXP 90 Dual Fuel
