F-40 Laminator Operator Manual
Maintenance and Troubleshooting
© GBC Pro-Tech 1998 February
4-3
To clean the laminator rolls:
1.
Remove the infeed table and infeed pressure plate
to gain access to the rolls.
WARNING
2.
While the laminator is at normal operating temper-
ature, put on the rubber gloves and, using a rubber
cement eraser, remove any heat activated adhesive
from the rolls.
CAUTION
CAUTION
Exercise extreme caution while cleaning the
laminator. You can be caught in the turning rolls
and crushed or burned.
If silicone adhesive contacts the upper or lower
roll, remove it IMMEDIATELY using a rubber
cement eraser. It can harden within an hour and
ruin the roll.
Do NOT pick or pull heat activated adhesive off
the rolls when they are cold. You can cause
irreparable damage to the laminating rolls.