11
7.0 INSTALLATION
7.1 Unpacking
1. Remove all packaging from the appliance.
2. Remove all plastic coatings.
3. Ensure there are no missing parts.
4. Ensure that no damage is evident.
7.2 Siting / Clearances
CAUTION:
If suiting, the necessary clearances to any combustible wall
MUST
BE
the largest figure given for individual appliances instructions.
If a Gully is used in the premises, ensure there is a gap of
200mm between the gully and front of the appliance.
DO NOT
directly connect the flue to any mechanical extraction system or to the outside air.
The flue discharges vertically through hob rear. Care should be taken not to disturb the air
combustion admission and evacuation of the flue.
150mm from any combustible wall.
Well lit draught free area.
Level, Fireproof surface.
150mm
150
m
m
