BOLERO-LT Hardware Description
Version 1.0.6
Casing :
➢
Fully shielded
Certifications
:
➢
Fully type approved confirming with R&TTE directive.
➢
CE, FCC, PTCRB, e1, IC.
Directive
:
➢
RoHS compliant.
Firmware
:
➢
Embedded TCP/IP stack (inc. TCP, IP and SMTP
protocol),
➢
Accessible via PFAL commands,
➢
Upgradeable via serial port and remotely over the air
(GPRS/TCP interface).
Memory :
➢
8 Mbyte FLASH for configuration, data-logging and
firmware storage
➢
2 MByte RAM
Evaluation kit :
➢
The BOLERO-LT Evalkit is designed to test, evaluate
and make basis configuration to enable remote
monitoring/configuration of the FALCOM BOLERO-LT. It
provides a sample configuration for application.
Supported protocols
(see chapter
4.4
)
:
➢
NMEA msg.:
GLL, GGA, RMC, VTG, GSV, GSA
➢
FALCOM msg.:
IOP, GSM, AREA, 3DP, BIN
.
4.1.1 Power consumption
Test conditions for the BOLERO-LT device as a standard version (without options):
All measurements have been performed at T
amb
= 25 °C, V
+
= 12 V.
All measurements have been made with DCS 1800 MHz; GPRS PCL 10; 2xChannels Down &
1xChannel Up; GPRS Coding scheme CS4;
Operating modes
approx. [mA]
GSM Off / GPS Off / No alarms
GSM Off / GPS On / No alarms
GSM On / GPS Off / No alarms
GSM On / GPS On / No alarms
47
65
61
88
Note: These values may vary over time and environments condition can not be guaranteed.
Table 2:
Current consumption @ 12 VDC
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 16