BOLERO-LT Hardware Description
Version 1.0.6
Version history:
This table provides a summary of the document revisions.
Version
Author
Changes
Modified
-
1.0.6
F. Beqiri
-
Replaced Figure
12
- corrected the sequence of the LED assignment.
25/06/2010
1.0.5
F. Beqiri
-
Replaced
Figure 2
- CANBus option removed from the block diagram.
18/02/2010
1.0.4
F. Beqiri
-
Updated
Table 8
- the color of pins added.
-
Added PFAL commands for controlling the status of the LED indicators on the device.
25/11/2009
1.0.3
F. Beqiri
-
Operating voltage ranges from
10.8
to
32.0
VDC.
-
Replaced 300mA/h battery by a 500mA/h one.
-
Storage temperature with internal battery is -20 bis +60°C.
-
Added power consumption - see chapter
4.1.1
.
- Corrected RX & TX pin assignment on the 8pin connector -
black-wire is TX (output), while
orange-wire is RX (input)
.
-
By default, the BOLERO-LT devices will now be supplied with
µ-blox
GPS receiver, while
SirfStarIII
remains optional.
13/01/2009
1.0.2
F. Beqiri
-
Increased Flash capacity to 8 MB
(hardware revision
04-N
and above)
.
21/04/2008
1.0.1
F. Beqiri
-
Excluded audio from device options.
-
A small description about the supported power saving modes added - see chapter
5.1.3.
01/04/2008
1.0.0
F. Beqiri
-
Initial release
04/12/2007
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 4