![background image](http://html2.mh-extra.com/html/magellan/roadmate-1200-automotive-gps-receiver/roadmate-1200-automotive-gps-receiver_user-manual-addendum_3421487001.webp)
Triton User Manual Addendum
This addendum applies to Triton GPS receivers that have a software version that is equal
to or higher then the ones listed.
Triton 300
01.90.00.0279
Triton 400
01.74.00.0278
Triton 500
01.92.00.0283
Triton 1500
01.53.00.0134
Triton 2000
01.68.00.0138
The Main Menu and Contextual Menu Access.
The most noticeable change in the
software is that you can now access the
Main Menu
on any of the Navigational screens by
pressing the
MENU
button. Pressing
ENTER
on any of the Navigational screens brings
up the contextual menu with many more options then were previously available.
Area Calculation.
The Triton receiver can calculate the
perimeter and area of the space defined by your track. It
takes your current track (or a saved track or route) and
computes the values for the perimeter and area.
In this example, the track was started at point A and
continued around to it’s current location, point B. The
Triton has added an imaginary line ( C ) to connect the start
and end points of the track. The Area and Perimeter are
then computed and displayed at the top of the screen.
To access area calculation, press
ENTER
while viewing the
Map
screen. Scroll down the contextual menu and select “View Area Calculation”.
Press
ESC
when you are done.
Pause and Resume Active Track.
With this software update you can pause and then
resume recording your track.
From any navigational screen press
ENTER
. On the contextual menu, select “Start New
Track”. This will initiate a new track beginning at your current location. As you move,
the Triton will record your track, following your “footsteps”. When you want to pause the
recording of your track, press
ENTER
from any navigational screen. Select “Pause Track
Record”. When you want to begin recording your track again, select
ENTER
again and
select “Resume Track Record”. When you are ready to save the track to the Triton, press
ENTER
again and select “Stop & Save Track”. The track Info screen is displayed with
the option of assigning a name to the saved track (“Trail”).
User Grid.
(Advanced Users) You can set a user grid as the Coordinate System for your
Triton. When selecting User Grid, you will be presented with options to define the
parameters of the User Grid.