20
Fig. 7
Storing and stacking of packages
The packages are to be stored in a covered area, out of direct sunlight and in low humidity, at a
temperature between -10°C and 40°C. Stacking is not recommended: the small base of the package,
the weight and size make it hard and dangerous to stack.
Unpacking
After delivery, check the package for possible damage due to transport and storage. Check if all parts,
are complete. In case of damage during transport, immediately contact your transport
company. Packages have to be opened carefully (keep a safe distance when opening
straps) and be careful that no parts fall out of the package during opening.
Assembly
1.
Take the lift and control unit both out of the packaging and check if there are
damaged and/or missing parts referring to the parts list, if this is the case,
please contact your Falco-retailer.
2.
Mount the wheels under the control unit (fig.2).
3.
Now mount the ramps (1, fig.4). Remove the circlip (1, fig.5on one side of the
axle (2, fig.4) with a circlip pliers (2, fig.5) and remove the axle. Now align the
holes for the axle of the lift and ramp and put the axle through, if necessary
use EP40 Multi grease for better
gliding and place the circlip back.
4.
Now put the fabric hose cover (3,
fig.6)over the hydraulic line (1, fig.6)
and the signal wires (3, fig.6).
5.
Now connect the hydraulic line (1,
fig.6) to the coupler on the lift (4,
fig.6), secure it firmly.
6.
Now connect the signal wires inside
the control unit
(fig.7).
Fig. 2
Fig. 6
Fig. 4
Fig.5
