DUCTWORK
READ AND SAVE THESE INSTRUCTION
GROUNDING INSTRUCTIONS
This extractor must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of
electric shock by providing an escape wire for the electric current. This extractor is
equipped with a cord
having a grounding wire with a grounding plug. The plug must be plugged into an
outlet that is properly
installed and grounded.
WARNING – Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt
exists as to whether the extractor is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an
outlet near the extractor.
Controls
1. Warming lamps ON/OFF switch
The warming lamps are controlled by their own rocker switch for the warming lamps
to begin heating.
• COMMANDS:
A
= OFF
B
= SPEED I / OFF
C
= SPEED II / OFF
D
= SPEED III / OFF
E
= LIGHT
•COMMANDS:
A=TIMER – 15 MINUTES
B= SPEED I
C
= SPEED II
D
= SPEED III
E =LIGHT
•
If your extractor does not have the
INTENSIVE
speed function, press key A for
two seconds and it will be activated for 15 minutes after which it will return to the
