Fig. 6
FIXING OF THE EXHAUST DUCTING
Important:
• Remove the restrictive tape and make sure the blades are moving freely
• Align the duct with the exhaust opening by using the provided 4 pieces of ST4X10
Philip thread screws
• Use the duct tape to wrap all the duct joints for an airtight seal
Important:
• To provide extra support and to reduce the vibration, the extractor must fix onto the
concrete wall
• Please utilize the 2 pieces of ST4X15 Philip thread screws to fix the base of the
extractor onto the wood frame on the wall. (As illustrated in Fig. 5 & 6)
Important:
Install ductwork, making connection in direction of airflow as illustrated.
Secure joints in ductwork with sheet metal screws.
Wrap all duct joints with duct tape for an airtight seal.
