一、
Instructions for use
A
== power on / off
B
== automatically stop the timer on / off
C
== stalls, counting time display
D
== sliding touch strips
E
== motor, automatic on / off
F
== lamps on / off
Power on, press the A key, A key indicator lights, the All button to enter standby.
1) If you press the B key, B key indicator, the motor is the most low start, and the
default time of 15 minutes, stop the clock display flashes can change to stop the
clock time sliding touch D and C display ( display every five minutes), after 3
seconds, the the B key indicator flashes, most low-grade to enter the timing the
motor stops running, sliding touch D to change the motor stalls and C display, full
The grid for stir gear, when the motor running in the a stir gear, C the last two
frames on the display flashes.
2) If you press the E key, the motor is the most low start sliding touch D to change
the motor
stalls, and C on the display shows the full grid stir files, when the motor is running
in the file of the stir, C the last two frames on the display flashes.
When the motor is running, press the B button, B button indicator lights and
C screen starts flashing, you can change to stop the clock time sliding touch D and
C display (display every five minutes), 3 seconds after, B indicator flashes, the
motor into the timing to stop running; To cancel this function, press the B button
again.
3) when the F key is pressed, the indicator light lighting lights; then press the F
key, lighting the lamp.
Infrared light function:
1.Helps to assist with defrosting.
2. Heat preservation
Button for infrared lights. On/Off.
