•COMANDS PATTERN :
A= Filtering system / Set clock
B= Delay Timer
C= Speed 1/ “-” adjust / off
D= Digital display
E= Speed 1/ “+” adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time “
”is flashing on the digital
display, it reminds the user to clean the filters. After it’s cleaned and then assemble
back, push the key A till the light is off to set the function again.
When pushing key A for 3 seconds, the clock “
”on the digital display will
flash, press key A again to switch to set hours and minutes, and then press C or E
to set the correct time. The Clock’s system is 24 hours.
When the motor is running, press key B the light will on. At the same time it will
show symbol of “
” flashing on the digital display, press key B again to
switch the function into setting hours and minutes. To automatically shut off the
motor please press key C or key E. Press key B for 3 seconds to stop the delay
timer.
Press key C or E, the first speed is on, and it shows “
” on the digital display
，
and press key C once again to turn off
；
To run the 2
nd
, 3
rd
and “Turbo” speed,
press Key E. If “Turbo” speed is on, press key E once again to turn off; then to
press key C is to adjust the speed down from 3
rd
, 2
nd
to 1
st
speed. On the special
function set, after the speed “TURBO” runs for 2 minutes, it automatically
switches to 3
rd
speed.
Press key F, the light will flash, and the symbol “
” will flash on the
digital display
，
to press key F again is to set hours and minutes. Set the alarm
time by pressing the key C or E. To stop the alarm, press the key F. And to cancel
the alarm set, press key F for 3 seconds.
Press the key G, the light is on, and it shows “
” on the digital display. Press the
key G again is to turn off the light.
