____________________________________________________________________________
- 45 -
4.2 Voltage, current acquisition speed
After the above communication configuration is completed, if the user needs to increase the voltage, current
acquisition speed, the configuration can be as follows:
1. Press
to enter main menu page;
2. Select “Set” >> “App Set”, press
to show as below:
Set
System
Edit
About
Samp Rate
10Hz
Prio SLT
Volt
V
slew-UP
5000.0 V/s
V
slew-DN
5000.0 V/s
I
slew-UP
2000.0 V/s
I
slew-DN
2000.0 V/s
Figure 4-2 Application Setting
3. Select required speed in “Samp Rate” , there are 5 choices select-able, Default is 10Hz.
4.3 Communication Interfaces
4.3.1 USB (Serial)
FTP9000 provides a USB virtual serial port, compatible with Windows XP/7/8/10. For specific driver software and
installation, please refer to the "CD and Software User Manual".
The USB port uses a baud rate of 9600bps by default, parity type is None, and does not support flow control.
Also, it adopts USB-B type terminal, users can use the accessory USB communication cable to easily connect to
the USB port on the PC. Its pin signals are described in the following table:
Table 4-3 USB Interface Signals
Pin NO.
Description
1
5V DC
2
Data-
3
Data+
4
GND
Summary of Contents for FTP9000 Series
Page 2: ......
