FTP9000 Series Programmable DC Power Supply Operation Manual
____________________________________________________________________________
- 34 -
6.
Input number “2” and press
to validate the setting, the setting parameters now stored to position “2”;
7. Press
to enter recall interface;
8.
Input number “1” and press
to activated it, the power supply will switch to static output with the recalled
parameters of position “1”: voltage 12V, current 10A, power 1000W, maximum voltage and current slew rate;
9. Press
to enter recall interface;
10.
Input number “2” and press
to activated it, the power supply will switch to static output with the
recalled parameters of position “2”: voltage 24V, current 20A, power 2000W, maximum voltage and current slew
rate;
Shortcut Function
1. Press
;
2.
Select “Set” >> “System” and press
, then select “Others” and press
again;
3.
Set “Shortcut” as ON, so as to activate it;
4.
Press
to return to MAIN PAGE;
5. In MAIN PAGE, when it is not in parameter editing state, press number key to quick recall parameters in
position 1~10.
corresponds to storage location 1 ~ 9,
corresponds to position 10.
3.10 Power-down Save
FTP9000 series provides power-down save function. The power supply will resume last time working parameters
at its power on moment when power-down save function is activated, otherwise the power supply will initialize
using default parameters when it is turned on.
1. Press
;
2.
Select “Set” >> “System” and press
, then select “Others” and press
again;
3.
Set “Power Save” item as ON, so as to activate it;
Summary of Contents for FTP9000 Series
Page 2: ......
