Fagor 6H-760 N, Installation And User Manual

Page: 15 / 160

15
Tip
In all circumstances, if your efforts are not sufficient, contact the After-Sales Service
Department without delay.
If you have a doubt about the correct functioning of your oven, this does not
necessarily mean that there is a malfunction.
In any event, check the following items:
5 / WHAT TO DO IF YOUR OVEN MALFUNCTIONS
Warning
- Repairs to your appliance should only be performed by professionals. Non-standard repairs
may be a source of danger for the user.
99645831 04/08
EN
YOU OBSERVE
THAT…
POSSIBLE
CAUSES
WHAT SHOULD YOU DO?
The oven is not
heating.
- The oven is not connected to
the power supply.
- Your fuse is out of order.
- The selected temperature is
too low.
➡
Plug in your oven.
➡
Replace the fuse in your
electrical set-up and check its
capacity (see table, section
“cable/fuse cross-section”).
➡
Increase the selected
temperature.
The oven light is not
working.
- The light is out of order.
- The oven is not connected or
the fuse is not working.
➡
Change the bulb.
➡
Plug in your oven or change the
fuse.
The pyrolysis cleaning
cycle does not begin.
- The door is not properly
closed.
- The locking system is
defective.
➡
Check that the door is locked.
➡
Call the After-Sales Service
Department.
Your oven starts
beeping.
- During cooking.
- At the end of a cooking
cycle.
➡
The recommended temperature
of your choice has been reached.
➡
Your programmed cooking
cycle is finished.
The cooling fan
continues to operate
after the oven stops.
- The fan should work for a
maximum of one hour after
cooking, or when the oven
temperature is greater than
125°C.
- If it does not stop after 1 hour
➡
Open the oven door to
accelerate the cooling down of the
oven
➡
Call the After-Sales Service
Department.