23
Too large a value assigned to an arithmetic parameter in parametric programming.
24
Arithmetic division by 0.
25
Square root of a negative figure.
26
Parametric block edited wrong.
27
A tool too large has been selected. For example, when assigning an arithmetic parameter value greater than 10
to a "T" function.
28
More than 4 "M" functions have been programmed in a block or 4 "M" functions in a block containing an "S"
function which involves a gear (range) change (M41,M42,M43 or M44).
29
There are no selected spindle ranges (P36, P37, P38 and P39=0), or the "S", spindle speed, value is too high.
30
Value of machine parameter P24 or P25 greater than that of P27.
31
Value of machine parameter P64 or P65 greater than that of P67.
32
Y axis machine parameter error:
> The braking distance (P43) is smaller than the In-position zone (P68).
> The P43 value, is greater than 8388.607 mm or 330.259 inches.
Y axis execution error:
> The movement cannot be executed since, due to the programmed feedrate, the braking distance is smaller
than the In-Position zone (Open Positioning Loop).
33
RS 232 C transmission error.
34
Too long a block transmitted via RS 232 C.
35
Wrong block in the RS 232 C transmission.
36
A block has been program which forces the Y axis to overrun its travel limits.
37
Internal temperature limit exceeded.
38
Y axis not controlled:
> The Y axis has shifted a distance 16 times the in-position zone once the brake has been activated.
> The moving direction does not correspond to the sign of the analog voltage.
> The actual Y axis feedback pulses are not between 50% and 200% of the theoretical ones within the time
window set by machine parameter P12.
39
Y axis feedback alarm.
40
Y axis travel limit overrun.
41
Y axis following error.
42
The programmed circle does not go through the defined end point (tolerance 0.01 mm).
43
The circular interpolation is missing the I, J values or has been defined wrong.
44
A wrong block has been programmed, either in itself or with respect to the program history up to that point.
45
A function has been programmed which is not permitted by machine parameters.
46
Tool checksum error.
47
LAN error, It is not working.
48
Wrong command, the destination node cannot interpret it.
49
Misconfigured LAN, a certain node has not been accepted in the LAN.
50
The destination node cannot attend to the command (in execution).
51
The axes must be referenced (homed) after power-up.
