Section:
Page
PROGRAMMING
32
Chapter: 6
6.8.4 LOADING THE PUNCH SIZES (G60)
Function G60 can be used in two different ways.
For loading zero offsets
This is explained in section 6.3.3.2 of this same manual.
For loading the punch dimensions
This is particularly meant for punching machines. Machine parameter "P101(7)=1"
must be set.
The CNC takes into account the dimensions of the punch during program execution,
preventing its extremes from exceeding the travel limits fixed by machine parameter.
The programming format is G60 X Y. Values X and Y indicate half of the punch
dimensions according to axes X and Y.
When the punch is round values X and Y coincide with the punch radius.
Attention:
On power-up, after executing M30 or after an Emergency or Reset, the
CNC assigns value 0 to both dimensions of the punch.
OTHER FUNCTIONS
