Page
Chapter: 4
Section:
PROGRAM EDITING
11
4.3 PLAY-BACK EDITING
Press
to access this operating mode.
In this editing mode and while editing a block, it is possible to jog the axes to the desired
point and then enter the coordinate values reached as program data.
The rest of the functions are edited as described for the Editing mode earlier in this chapter.
The following example shows how to program a block of the G1 X___ Y___ F100 type.
The screen displays field "G"
- Press key [1] and then key [A+] to go on to the next field.
The screen shows field "X"
- Press key [Recall] and the CNC will display the present position of axis X.
- Move the axis to the required position by means of the electronic handwheel, keys
or push-buttons "X+, X- associated with the "JOG100" external
operator panel.
- Press key [Enter] for the CNC to assume this value.
- Press key [A+] to go on to the next field.
The screen displays field "Y"
- Press key [Recall] and the CNC will display the present position of axis X.
- Move the axis to the required position by means of the electronic handwheel, keys
or push-buttons "Y+, Y- associated with the external "JOG100"
operator panel.
- Press key [Enter] for the CNC to assume this value.
- Press key [A+] to go on to the next field.
The screen displays field "F"
- Move the axis to the required point
- Press the keys [l] [0] [0]
- Press key [Enter] for the CNC to assume this value and take the block as having
finished
PLAY-BACK EDITING
