8
pic. 15
pic. 16
Connector
LED
motor
common
motor live
(Pic.19)
[B]
motor live
(Pic.19)
[B]
8
7
6
5
4
3
2
1
16
15
14
13
12
11
10
9
53
51
52
17
16
18
ATTENTION: TIGHTEN THE CABLE GLAND VERY
WELL BEFORE CLOSING THE CONNECTOR,
OTHERWISE GRADE OF PROTECTION AGAINST
SEEPAGE CANNOT BE GUARANTEED
IP 66
!
(see the instructions
attached to this accessory)
English
motor
common
motor live
(Pic.19)
[B]
motor live
(Pic.19)
[B]
18
17
16
IP 66
!
multipolar cable (not
supplied) and earth cable
IP 66
Connections to the terminals of
Elpro S50-T1 or Elpro S50-T2
or
Elpro S50-T3
controllers
(by cable type
BUT FLESSIBILE FG 7OR 12x1,5 mm²)
Earth cable size based on the characteristics of the place of installation.
OPENING THE PROTECTION COVER PLATE
Remove all the screws to be able to pull away the plate and then access the bollard inside for the electrical connections.
A watertight box is factory-fitted inside the bollard and pre-wired with all the required electrical connections to the bollard
(electric motor, limit switches, LED lights).
Anti-terrorism retractable oil-hydraulic bollard
flasher and/or
beeper
“Talos series heater”
card
optional on demand
common led and/or beeper
12
11
56
limit switch GND
green wires of the blue and grey cables
limit switch opening
grey cable - white wire
(Pic.18)
[C]
limit switch closing
blue cable - white wire
(Pic.18)
[C]
55
limit 24 Vdc
brown wires of the
blue and grey cables
Elpro S50-T1 or
Elpro S50-T2 or
Elpro S50-T3
Elpro S50-T1 or
Elpro S50-T2 or
Elpro S50-T3
12
M18
